& &
Forum
  • Resim Yükle
  • Portal
  • Arama
  • Üye Listesi
  • Yardım

  • 4TXKLaYV0
    (https://spower-portablelineboring.com/)
    https://spower-portablelineboring.com/


    Üyelik Tarihi: 13-12-2021
    Doğum Tarihi: 04-04-1990 - [Şu anda 31 yaşında]
    Şu anki Tarih: 20-01-2022 Saat: 02:08
    Durum: Çevrimdışı
    Avatar

    4TXKLaYV0' Forum Bilgileri
    Kayıt Tarihi: 13-12-2021
    Son Ziyareti: 14-12-2021Saat:07:03
    Yorumları: 0 (Günlük ortalama 0 | Toplam yorumların %0)
    Konuları: 0 (Günlük ortalama 0 | Toplam konuların %0)
    Aktiflik Süresi: 7 Dakika
    Referansları: 0
    Rep Puanı: 0 [Ayrıntılar]

    4TXKLaYV0 İletişim Bilgileri
    Web Sitesi: https://spower-portablelineboring.com/
    Skype ID: https://spower-portablelineboring.com/
    Google Hangouts ID: https://spower-portablelineboring.com/
      
    4TXKLaYV0, Hakkında Kişisel Bilgiler
    Yer: https://spower-portablelineboring.com/
    Biyografi:

    When repairing bores is the challenge at hand, time is of

    the essence. You need to get back up and running as quickly as

    possible without sacrificing quality, accuracy or safety. Here’

    s why owning a BORTECH auto bore welding machine is exactly what

    you need to get back in action – fast!

    Save time by performing two tasks simultaneously. Welding and

    boring can be performed simultaneously on different bores using

    the CLIMAX [url=https://spower-portablelineboring.com/]line

    boring system[/url] with the BORTECH automated bore welder.


    Quick change from line boring to welding. The BORTECH automated

    bore welder seamlessly interfaces with the CLIMAX bearing system

    for a five-minute changeover from boring to welding.


    Weld virtually any kind of workpiece. The adjustable mounting

    base allows the mounting of the BORTECH auto bore welder to fit

    any workpiece when used independently of the CLIMAX bearing

    mounts.

    Speed! The BORTECH auto bore welder is up to 75% faster than

    hand-welding, with the ability to lay 5 lbs of metal per hour,

    hour after hour.

    Reduce hard spots and inclusions. The BORETECH auto bore welder

    reduces hard spots and inclusions by 95% vs. hand-welding.


    Beautiful welds, easier to machine. A consistent and uniform

    weld deposit provides a smooth, defect-free surface for

    subsequent machining. This reduces cutting tool wear and reduces

    machining time by up to 50% vs. hand-welding.


    Keyways? Split lines? No problem! The BORTECH Auto-Skip

    feature is perfect for skipping keyways or split lines,

    eliminating the need to manually “skip” no-weld areas.


    Return out-of-round bores to circular. Extended use of

    Auto-Skip capability allows automated correction of out-of-round

    bores, using Pie Mode or Carriage Return, which prevents over-

    boring or slugging.


    Reversible rotation for added flexibility.  Reversible

    rotation gives the operator the ability to weld in either

    rotation direction, allowing unlimited weld passes to be

    performed with minimal welding challenges when compared to

    unidirectional bore welding machines.


    Adjust torch diameter independently of torch angle. The

    BORTECH Offset Head provides torch diameter adjustment without

    changing the torch angle. Maintaining the correct torch angle

    makes for consistent and repeatable welding results.


    Total control of welding parameters. The BORTECH BW3000 is

    the only MIG bore welder that gives you control over every

    welding and positioning parameter.


    Improved health and safety. BORTECH auto bore welders keep

    operators away from harmful smoke and fumes, contributing to

    safety in the workplace.


    Boring business arms owners with tools for success
    The portability of its product is the feature that a small

    Stillwater company uses to market the patented machines it

    produces.
    Strangely enough, each machine weighs 420 pounds.
    Laptop computers they're not, but then the machines that

    Portable Line Bore Corp. manufactures are not white-collar in

    any way, shape or form.

    [url=https://spower-portablelineboring.com/]Line-boring

    machines[/url] are cutting tools used to repair heavy

    equipment--backhoes, bulldozers, front-end loaders and such--

    which can weigh several hundred tons. The machines shave off

    metal to within a 1,000th-of an-inch tolerance in the holes that

    house the pins that hold the the movable buckets, blades and

    swing arms onto the bodies of heavy equipment.


    The holes get out of round, and when you replace the pins, they

    must be exactly in line," said Jeff Skaarup, a partner in

    Portable Line Bore Inc. with Liz Schoonmaker. If the holes are

    not exact, what starts out as a square ditch or level area could

    end up canted to one side or the other.


    Stationary line-boring machines 30 to 35 feet long can do the

    repairs, but when bushings break or bearing housings wear out on

    heavy-duty equipment, moving that large machinery to a shop for

    repairs can be time-consuming and expensive.


    Terry Marr, maintenance shop supervisor at the Glenbrook Nickel

    Co., a nickel-smelting firm in Riddle, Ore., cited a case where

    the company paid $17,000 for a single line-boring job, and that

    was for only two holes.

    It's a very large machine that picks up thousands of tons

    all the time," he said of the loader that needed repairs.

    But it had to be transported overland 80 miles to a rail shop to

    be worked on.


    We don't do a lot of [line-boring], but I know we'll be

    able to do it for quite a bit less," Marr said, and it

    shouldn't take the company long to recoup the $14,000 cost

    of the machine it purchased from Portable Line Bore Corp. this

    year.

    Skaarup added that his company's devices, which are about

    2.5 feet wide and a 1.5 feet high and powered by a half-

    horsepower motor, will do exactly the same thing as the much

    larger machines.

    They can bore holes from 1.5 inches to 18 inches in diameter

    using an 8-foot-long cutting bar that attaches to the motor

    housing. And, because they are portable, the machines can be

    mounted on the damaged equipment horizontally or vertically.

    Even though the devices weigh a total of 420 pounds, they can be

    disassembled easily, Skaarup said, and one person can set one up

    in about 30 to 45 minutes.
    But not just anybody can use these machines.

    You have to be mechanically inclined," Skaarup said,

    although perhaps not as mechanically inclined as the

    product's inventor--Bob Bareis, who once operated a machine

    shop in Altamont.


    Bareis, who developed the product in 1985 and received a U.S.

    patent in 1989, sold only three or four machines a year before

    selling the patent and manufacturing rights to Skaarup and

    Schoonmaker in 1996.

    RECOMMENDED
    EDUCATION
    From ideas to reality: Go inside Vandy's ideas machine
    COMMERCIAL REAL ESTATE
    Photo tour: Asurion just finished moving 2,050 employees into

    its new $285M downtown headquarters
    RESIDENTIAL REAL ESTATE

    Arcadia home lands 'unachievable' sale price with help

    from TV celebrity agent Josh Altman

    We market it. He never did," said Schoonmaker. The company

    has shipped half a dozen machines since December, and has orders

    for three more.
    The biggest problem was getting production set up," added

    Skaarup, who directs the firm's sales and marketing efforts.

    Bareis had the aluminum castings for the machine parts made in

    China and shipped to him for assembly, but Skaarup and

    Schoonmaker decided to bring that operation back to the United

    States in order to maintain tighter quality control. But they

    first had to translate the mechanical drawings from Chinese and

    metric measurements to English and inches, using some of the

    original drawings they acquired from Bareis and a computer-aided

    design program to verify the dimensions.

    Now, the castings are made by M.G. Carter & Sons in Coxsackie,

    and the parts are machined by Raloid Tool Co. in Mechanicville.

    The machines then are assembled by Portable Line Bore's two

    employees.

    As we grow, we'll be doing more of the machining

    ourselves," Skaarup said, adding that the company now could

    make 50 machines a month with no problem, as long as it keeps

    the pipeline full and the castings coming.

    It's a real fast turnover," he said. "It's not

    a lengthy process.

    And Skaarup and Schoonmaker think there's a market for that

    many machines each month.

    Every time you turn around there's another

    application," Skaarup said, "We're always open to

    feedback from people using it in the field, and we're

    willing to modify it.

    He added that the firm has received inquiries from companies

    considering using the [url=http://www.spower-

    portablelineboring.com/portable-line-boring-welding-machine/]

    portable line boring welding machine[/url]s on aircraft landing

    gear, marine engines and drilling equipment.

    Marr, of Glenbrook Nickel, said he sees 100 to 200 applications

    for the portable line-boring machine on the smaller pieces of

    equipment the company uses in its nickel-smelting operation.


    Most of Portable Line Bore's marketing efforts are through

    word-of-mouth, trade shows and advertisements in trade

    magazines. Eventually, Skaarup and Schoonmaker hope to establish

    dealerships across the country, with a goal of at least two in

    each state. The dealerships could sell and rent the machines as

    well as provide service in the field.


    The pair also plan to open a manufacturing plant in Florida to

    serve the Southeast--which has a year-round construction season

    and potentially greater demand for the company's product--

    once the company is established firmly in the Northeast.


    And they're not relying solely on a single product.
    They offer optional accessories for the machines, including a

    bedplate and loader arm support assembly so the machine can be

    converted into machine shop equipment but easily converted back

    again into a portable machine for use in the field.

    The company also produces a hydraulic line-boring machine that

    drills holes 8 inches to 40 inches in diameter. That machine,

    which costs $29,000, is not portable and is used for specialty

    applications, Skaarup said.
    Customers also can lease the machines on a weekly or monthly

    basis, and the company can design parts to meet specific needs.


    Portable Line Bore also is in the process of developing two new

    products, including a smaller, lightweight machine, dubbed the

    PLB Jr., that will bore holes from 1.5 inches to 4 inches in

    diameter using a variable speed motor on a device similar to a

    hand drill.

    The second machine, called the PLB Sr., is identical to the

    company's primary product, but is powered by a full

    horsepower motor, providing more inch-pounds of torque.

    And with Schoonmaker owning 60 percent of the company and

    holding the title of chief executive officer, the firm one day

    hopes to take advantage of its woman-owned status to land

    contracts with the state Department of Transportation and the

    U.S. Department of Defense.
    Cinsiyet: Belirtmek İstemiyorum

    Discord Sunucumuz

    Discord Discord

    Reklam Alanı

    GrafikLab
    Türkçe Çeviri: MCTR, Yazılım: MyBB, © 2002-2022 MyBB Group.
    Resim

    a

    b

    d

    e
    f